Руководство Пользователя для Nortel 4000

4-25

Chapter 4    Setting Up RACs

Managing Remote Access Concentrators Using Annex Manager

•

The

 Remote Username

 field contains the user name by which the

RAC identifies itself when the remote PPP peer asks for
authentication. This name can contain up to 15 characters.

•

The

Remote Password

 field defines the user's password that the

RAC uses when the remote PPP peer requests authentication.
For security reasons, Annex Manager displays this value as set
or unset. This password can contain up to 15 characters.

The

Time

 box defines activity on the ports you selected and controls

inactivity timers.

•

The

CLI Inactivity Timer

 specifies the amount of time in minutes

that the RAC remains idle before disconnecting a CLI session
from a port. Entering zero disables the timer; entering 255
causes the RAC to disconnect as soon as it exits from its last
job. You can enter any number of minutes up to 255. Unlike the
port inactivity timer, this timer does not disconnect a CLI
session with active jobs.

•

The

Port Inactivity Timer

 field specifies the number of minutes

that a port can remain inactive. If the timer expires, the RAC
terminates all sessions and resets the port. Use the

Input is

Activity

 and

Output Is Activity

 buttons to define activity as input to

the port or output from the port. If you do not use these buttons
the timer runs independent of activity. You can enter any
number of minutes up to 255 minutes.

•

The

Input Is Activity

 button defines activity as input. If you click

this button the RAC sets the inactivity timer when it receives
input at the port.

•

The

Output Is Activity

 button defines activity as output. If you

click this button the RAC sets the inactivity timer when it sends
output from the port.

The

LAT

 box defines group codes.