Руководство Пользователя для Nortel 4000

8-7

Chapter 8    Configuring Modems

Managing Remote Access Concentrators Using Annex Manager

successful connect messages that the modem can return.
You can enter up to 80 status codes.

•

Dialin Setup Command

 contains the command the RAC sends to

incoming modem ports before the first user connects to a port.
The command should include all modem steps required to
answer a call coming into the RAC. For example, it should turn
on the auto-answer feature and disable inbound modem connect
messages.

•

Dialout Setup Command

 contains the command the RAC sends to

all serial device ports before they becomes active. This
command should contain all configuration information required
for the RAC to initiate an outbound call. For example, it should
disable the auto-answer feature and enable modem connect
messages. You can enter up to 80 characters.

•

Revert to default modem values

 displays default values for a

modem when you changed the default definition.

The Annex Manager modem database consists of modem definitions
stored in the RAC configuration file and in

include

 files. Annex Manager

Setup mode provides:

•

The

Modems

 section of the RAC configuration file. The RACs

you select must use the same configuration file on the same host
and must use the same address for current and default boot
hosts. The configuration file does not have to reside on the
same host as does Annex Manager.

•

Any

include

 files referenced in the accessible RAC configuration

files. These

include

 files contain the Annex Manager default

modem definitions.

References to

include

 files must follow modem definitions

in the configuration file.