Руководство Пользователя для Nortel 4000

A-61

Appendix A    RAC Parameters

Managing Remote Access Concentrators Using Annex Manager

defines the hop count to the remote end of the serial line when

mode

 is set to

slip

or

ppp

. Modify this parameter only if you want the RAC to use a route other than

the SLIP or PPP interfaces to the remote end.

specifies whether you can identify a host in the host table by entering a minimal
string rather than the full host name.

sets the mode for access to an asynchronous port. You can enter:

•

cli

to allow a port connected to a terminal or incoming modem

access to CLI. CLI provides access to the network and
connections to other hosts via the

Telnet

,

connect

,

rlogin

 and

tn3270

commands

.

The

tn3270

command is available only when

option_key

is set to an appropriate value.

•

slave

to indicate that a port provides access to modems, serial

line printers, and other serial devices attached to an outgoing
port. It does not provide access to the CLI.

•

adaptive

 to allow slave and CLI capabilities. If a connection is

initiated via a RAC, the port enters CLI mode. If a connection
is initiated via a port server, the port enters slave mode.

Type

Async

Values

1 to 15

Default

1

Lists

Async Port, PPP, SLIP

Type

RAC

Values

enabled or disabled

Default

disabled

Lists

RAC Only, Modem