Руководство Пользователя для Nortel 4000

4-23

Chapter 4    Setting Up RACs

Managing Remote Access Concentrators Using Annex Manager

•

If you select the

Local

 button the RAC uses the value from the

RAC. If the remote address is set to 0.0.0.0, the RAC negotiates
for the address with the remote PPP client. The connection is
denied for a remote SLIP client.

•

The

Interface Protocol

 box lists the control protocols for which

the RAC negotiates. You can select a single button or any
combination of the following buttons:

•

atcp

 specifies the AppleTalk Protocol Control Protocol

•

ipcp

 specifies the Internet Protocol Control Protocol

•

ipxcp

 specifies the Internet Packet Exchange Control

Protocol

•

ccp

 specifies the Compression Control Protocol

•

The

AppleTalk

 Box uses the

Node ID

 field to specify the

AppleTalk hint used by the RAC on a specific port. You can
enter an ID in decimal or hexadecimal notation. Each ID has
two parts separated by a dot:

–

A network address that ranges from 0 to 65534 (0x0000 to
0xFFFE).

–

A node address that ranges from 0 to 254 (0x00 to 0xFE).

•

The

Rlogin/Telnet

 box uses the

Argument

 field to specify

arguments for

rlogin

 and

telnet

 commands. The

Argument

 field

contains the commands used when you select

Rlogin

 or

Telnet

 in

the

Mode

 box. Include a host name or address here. You can

enter up to 100 characters.