Руководство Пользователя для 3com 2226 PLUS
Configuring Link Aggregation
37
The Switch does not support the Link Aggregation
Control Protocol (LACP), which is specified in IEEE
802.3ad.
Control Protocol (LACP), which is specified in IEEE
802.3ad.
Trunk Membership
The Switch has four pre-defined trunks, each of
which can support up to eight ports.
which can support up to eight ports.
lists the
possible membership groups for each trunk.
Table 11 Port Groups and Members
Port Group
Ports
AL1
Ports 1-4, 13-16
AL2
Ports 5-8, 17-20
AL3
Ports 9-12, 21-24
AL4
Ports 25 and 26 (RJ-45 ports only)
These four port groups correspond to the four sepa-
rate physical connector blocks on the front panel of
the Switch. You cannot trunk ports that belong to dif-
ferent port groups.
rate physical connector blocks on the front panel of
the Switch. You cannot trunk ports that belong to dif-
ferent port groups.
A trunk can consist of either 10/100 ports or
10/100/1000 ports (fixed ports 25 and 26). It is not
possible to have a trunk containing a mixture of
10/100 and 10/100/1000 ports. Adding port 25 or 26
to a trunk containing 10/100 ports will result in an
error.
10/100/1000 ports (fixed ports 25 and 26). It is not
possible to have a trunk containing a mixture of
10/100 and 10/100/1000 ports. Adding port 25 or 26
to a trunk containing 10/100 ports will result in an
error.
A trunk created using ports 25 and 26 can only use
the fixed RJ45 10/100/1000 ports. SFP ports cannot
be aggregated.
the fixed RJ45 10/100/1000 ports. SFP ports cannot
be aggregated.
If a port is a member of an aggregated link (or trunk),
you will not be able to configure its individual port
settings. All member ports of an aggregated link will
have the same settings, and you can configure these
by clicking the AL link on the Port Configuration
screen. See
you will not be able to configure its individual port
settings. All member ports of an aggregated link will
have the same settings, and you can configure these
by clicking the AL link on the Port Configuration
screen. See
Adding Ports to a Trunk
To add ports to a trunk:
1
On the menu, click Link Aggregation. The Link Aggre-
gation screen appears.
gation screen appears.
Figure 18 Link Aggregation Screen
2
Add ports to a trunk by selecting the option buttons
for the ports. For example, if you want to add ports 1
to 4 to Trunk 1, click the option buttons under ports
01 to 04 that are on the same row as Trunk 1.
for the ports. For example, if you want to add ports 1
to 4 to Trunk 1, click the option buttons under ports
01 to 04 that are on the same row as Trunk 1.
Each trunk must not have more than eight member
ports.
ports.
3
Click Apply.