Руководство Пользователя для 3com 2226 PLUS

HAPTER

4: C

ONFIGURING

THE

WITCH

CAUTION: If you try to add a port to a trunk and the
speed setting of the port to be added does not match
that of the trunk, an error message appears and port
will not be added to the trunk.

Configuring Trunk Settings

Ports that are members of the same trunk will have
the same speed/duplex, autonegotiation, and flow
control settings. You cannot configure these settings
for individual member ports.

To configure the settings of a trunk’s member ports:

On the menu, click Port Configuration. The Port Con-
figuration screen appears.

Under the Port column, click the port group that you
want to configure. The Port Settings screen appears.

Figure 19 Port Settings Screen

Configure the status, autonegotiation, speed/duplex,
and flow control settings of the trunk as you would
configure an individual port (see available options in

Table 10

). Note however that these settings will be

applied to all members of the trunk.

Click Apply to save your changes.

Viewing Statistics

The Statistics screen shows a summary of traffic sta-
tistics for all ports, as shown in

Figure 20

Figure 20 Statistics Screen

Figures that appear onscreen indicate the number of
packets transmitted (Tx) and received (Rx).

■

To reset all packet counts to zero, click Clear
Counters.

■