Руководство Пользователя для 3com 2226 PLUS
40
C
HAPTER
4: C
ONFIGURING
THE
S
WITCH
6
Click Apply.
For information on how to interpret the output on
the port analyzer, refer to its accompanying docu-
mentation.
the port analyzer, refer to its accompanying docu-
mentation.
Setting the Traffic Priority
You can configure traffic prioritization for devices and
view a list of detected IP phones on the Traffic Prioriti-
zation screen. To access this screen, click Traffic Prior-
itization on the menu.
view a list of detected IP phones on the Traffic Prioriti-
zation screen. To access this screen, click Traffic Prior-
itization on the menu.
Figure 23 Traffic Prioritization Screen
The Traffic Prioritization screen has two sections:
■
IP Phone Prioritization
■
List of Detected Phones
IP Phone Prioritization
Use the IP Phone Prioritization section to enable or
disable traffic prioritization for NBX or other IP
phones.
disable traffic prioritization for NBX or other IP
phones.
lists the available options for this
section.
CAUTION: To ensure that the Switch recognizes the
NBX or other IP phone during phone initialization, do
not connect any data source to the phone until the
phone has finished booting up.
NBX or other IP phone during phone initialization, do
not connect any data source to the phone until the
phone has finished booting up.
Once the phone is available for use, any data source
(for example, a computer) can then be connected to
the phone's pass-through port. This only applies if
you use a single wall jack for your network connec-
tion and use the pass-through LAN port on the IP
phone.
(for example, a computer) can then be connected to
the phone's pass-through port. This only applies if
you use a single wall jack for your network connec-
tion and use the pass-through LAN port on the IP
phone.