Инструкции По Установке для 3com S7906E

 

2-6 

Terminate the connection to the 
remote SFTP server and return 
to user view 

Required. 
Use any of the commands. 

These three commands 
function in the same way. 

 

SFTP Client Configuration Example 

As shown in 

, an SSH connection is established between Switch A and Switch B. Switch A, an 

SFTP client, logs in to Switch B for file management and file transfer. An SSH user uses publickey 

authentication with the public key algorithm being RSA. 

Figure 2-1 Network diagram for SFTP client configuration 

 

 

1)  Configure the SFTP server (Switch B) 

# Generate RSA and DSA key pairs and enable the SSH server. 

<SwitchB> system-view 

[SwitchB] public-key local create rsa 

[SwitchB] public-key local create dsa 

[SwitchB] ssh server enable 

# Enable the SFTP server. 

[SwitchB] sftp server enable 

# Configure an IP address for VLAN interface 1, which the SSH client uses as the destination for SSH 

connection. 

[SwitchB] interface vlan-interface 1

 

[SwitchB-Vlan-interface1] ip address 192.168.0.1 255.255.255.0

 

[SwitchB-Vlan-interface1] quit

 

# Set the authentication mode on the user interfaces to AAA.  

[SwitchB] user-interface vty 0 4 

[SwitchB-ui-vty0-4] authentication-mode scheme 

# Set the protocol that a remote user uses to log in as SSH. 

[SwitchB-ui-vty0-4] protocol inbound ssh 

[SwitchB-ui-vty0-4] quit