Инструкции По Установке для 3com S7906E

 

1-11 

Clear the statistics about flush 
messages 

Available in user view 

 

As shown in 

 

z 

Map VLANs 1 through 10, VLANs 11 through 20, and VLANs 21 through 30 to MSTI 0, MSTI 1, and 

MSTI 2 respectively.  

z 

Traffic of VLANs 1 through 30 on Device C and Device D are dually uplinked to Device A.  

z 

Configure Smart Link on the devices for dual uplink backup, using VLAN 1 (the default) for flush 

update. 

Figure 1-2 Single smart link group configuration 

 

 

1)  Configuration on Device C 

# Create VLANs 1 through 30, map VLANs 1 through 10, VLANs 11 through 20, and VLANs 21 through 

30 to MSTI 0, MSTI 1, and MSTI 2 respectively, and activate the MST region configuration.  

<DeviceC> system-view 

[DeviceC] vlan 1 to 30 

[DeviceC] stp region-configuration 

[DeviceC-mst-region] instance 0 vlan 1 to 10 

[DeviceC-mst-region] instance 1 vlan 11 to 20 

[DeviceC-mst-region] instance 2 vlan 21 to 30 

[DeviceC-mst-region] active region-configuration 

[DeviceC-mst-region] quit