Инструкции По Установке для 3com S7906E

 

1-12 

z 

Execute the shutdown or undo shutdown command to an idle interface on the agent, and the 

NMS receives the corresponding trap. 

z 

As shown in 

, the NMS and the agent are connected through an Ethernet. 

z 

The IP address of the NMS is 1.1.1.2/24 

z 

The IP address of the agent is 1.1.1.1/24 

z 

Configure SNMP logging on the agent to record the operations performed by the NMS to the agent  

Figure 1-5 Network diagram for SNMP logging 

 

 

 

For the configurations for the NMS and agent, refer to 

 and 

 

# Enable logging display on the terminal. (This function is enabled by default, so that you can omit this 

configuration). 

<Sysname> terminal monitor 

<Sysname> terminal logging 

# Enable the information center to output the system information with the severity level equal to or 

higher than informational to the console port. 

<Sysname> system-view 

[Sysname] info-center source snmp channel console log level informational 

# Enable SNMP logging on the agent to log the GET and SET operations of the NMS. 

[Sysname] snmp-agent log get-operation 

[Sysname] snmp-agent log set-operation 

z 

The following log information is displayed on the terminal when the NMS performs the Get 

operation to the agent. 

%Jan 1 02:49:40:566 2006 Sysname SNMP/6/GET: