Инструкции По Установке для 3com S7906E

 

2-2 

Follow these steps to enable MAC Information on an interface: 

Enter system view 

system-view 

— 

Enter interface view 

interface interface-type 
interface-number 

— 

Enable MAC Information on the 
interface 

mac-address information 
enable { added | deleted } 

Required  

Disabled by default 

 

To enable MAC Information on an Ethernet interface, enable MAC Information globally first.  

 

Follow these steps to configure MAC Information mode: 

Enter system view 

system-view 

— 

Configure MAC Information 
mode 

mac-address information 
mode { syslog | trap } 

Optional  

trap by default 

 

To prevent Syslog or trap messages being sent too frequently and thus affecting system performance, 

you can set the interval for sending Syslog or trap messages.  

Follow these steps to set the interval for sending Syslog or trap messages: 

Enter system view 

system-view 

— 

Set the interval for sending 
Syslog or trap messages 

mac-address information 
interval interval-time 

Optional  

One second by default.  

 

To avoid losing user MAC address information, when the buffer storing user MAC address information is 

used up, the user MAC address information in the buffer is sent to the monitor end in the network, even 

if the timer set for sending MAC address monitoring Syslog or trap messages has not expired yet.  

Follow these steps to configure the MAC Information queue length: