Инструкции По Установке для 3com S7906E

 

2-3 

Enter system view 

system-view 

— 

Configure the MAC Information 
queue length 

mac-address information 
queue-length value 

Optional  

50 by default 

 

z 

Host A is connected to a remote server (Server) through Device.  

z 

Enable MAC Information on GigabitEthernet2/0/1 on Device. Device sends MAC address change 

information using Syslog messages to Host B through GigabitEthernet2/0/3. Host B analyzes and 

displays the Syslog messages.  

Figure 2-1 Network diagram for MAC Information configuration 

 

 

1)  Configure Device to send Syslog messages to Host B. 

Refer to Information Center Configuration in the System Volume for details.  

2)  Enable MAC Information.  

# Enable MAC Information on Device.  

<Device> system-view 

[Device] mac-address information enable 

# Configure MAC Information mode as Syslog.  

[Device] mac-address information mode syslog 

# Enable MAC Information on GigabitEthernet2/0/1 

[Device] interface gigabitethernet2/0/1 

[Device-GigabitEthernet2/0/1] mac-address information enable added 

[Device-GigabitEthernet2/0/1] mac-address information enable deleted 

[Device-GigabitEthernet2/0/1] quit 

# Set the MAC Information queue length to 100.  

[Device] mac-address information queue-length 100