Инструкции По Установке для 3com S7906E
1-14
Configuring IPv6 BGP Soft Reset
Enable route refresh
Follow these steps to enable route refresh:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address
family view
family view
ipv6-family
—
Enable route refresh
peer { ipv6-group-name | ipv6-address }
capability-advertise route-refresh
capability-advertise route-refresh
Optional
Enabled by default.
Perform manual soft-reset
Follow these steps to perform manual soft reset:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family view
ipv6-family
—
Save all routes from an IPv6
peer/peer group, not letting
them go through the inbound
policy
peer/peer group, not letting
them go through the inbound
policy
peer { ipv6-group-name | ipv6-address }
keep-all-routes
keep-all-routes
Optional
Not saved by
default.
default.
Return to user view
return
Soft-reset BGP connections
manually
manually
refresh bgp ipv6 { all | ipv6-address |
group ipv6-group-name | external |
internal } { export | import }
group ipv6-group-name | external |
internal } { export | import }
Required
If the peer keep-all-routes command is used, all routes from the peer/peer group will be saved
regardless of whether the filtering policy is available. These routes will be used to generate IPv6 BGP
routes after soft-reset is performed.
Enabling the IPv6 BGP ORF Capability
The BGP Outbound Route Filter (ORF) feature allows a BGP speaker to send to its BGP peer a set of
ORFs through Route-refresh messages. The peer then applies the ORFs, in addition to its local routing
policies (if any), to filter updates to the BGP speaker, thus reducing the number of exchanged Update
messages and saving network resources.