Справочное Руководство для 3com S7906E
1-36
<Sysname> system-view
[Sysname] mpls lsr-id 1.1.1.1
[Sysname] mpls
[Sysname-mpls] quit
[Sysname] mpls ldp
[Sysname-mpls-ldp]
# Enable LDP for VPN instance vpn1 and enter MPLS LDP VPN instance view.
<Sysname> system-view
[Sysname] mpls ldp vpn-instance vpn1
[Sysname-mpls-ldp-vpn-instance-vpn1]
mpls ldp (interface view)
Syntax
mpls ldp
undo mpls ldp
View
Interface view
Default Level
1: Monitor level
Parameters
None
Description
Use the mpls ldp command to enable LDP on an interface.
Use the undo mpls ldp command to disable LDP on an interface.
By default, LDP is disabled on an interface.
After you enable LDP on an interface, the interface will periodically send Hello messages.
Before enabling LDP in interface view, be sure to complete the following tasks:
z
Use the mpls lsr-id command in system view to configure the LSR ID.
z
Use the mpls command in system view to enable MPLS.
z
Use the mpls ldp command in system view to enable MPLS LDP globally.
z
Use the mpls command in interface view to enable MPLS for the interface.
If the interface is bound to a VPN instance, you need to use the mpls ldp vpn-instance command to
enable LDP for the VPN instance before enabling LDP on the interface.
Currently, this command supports only VLAN interface.