Справочное Руководство для 3com S7906E

 

1-38 

value: Length of time for the Hello timer, in the range 1 to 65535 seconds. 

Use the mpls ldp timer hello-hold command to set a Hello timer. 

Use the undo mpls ldp timer hello-hold command to restore the default. 

In interface view, you can set the link Hello timer; in MPLS LDP remote peer view, you can set the 

targeted Hello timer. 

By default, the value of the link Hello timer is 15 seconds, and that of the targeted Hello timer is 45 

seconds. 

 

Changing the values of the Hello timers does not affect any existing session. 

 

Related commands: mpls ldp (system view), mpls ldp (interface view). 

# Set the link Hello timer to 100 seconds on interface VLAN-interface 1. 

<Sysname> system-view 

[Sysname] interface vlan-interface 1 

[Sysname-Vlan-interface1] mpls 

[Sysname-Vlan-interface1] mpls ldp 

[Sysname-Vlan-interface1] mpls ldp timer hello-hold 100 

# Set the targeted Hello timer to 1000 seconds. 

<Sysname> system-view 

[Sysname] mpls ldp remote-peer BJI 

[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3 

[Sysname-mpls-ldp-remote-bji] mpls ldp timer hello-hold 1000 

mpls ldp timer keepalive-hold value 

Interface view, MPLS LDP remote peer view 

1: Monitor level