Справочное Руководство для 3com S7906E
1-12
display this
Syntax
display this [ by-linenum ]
View
Any view
Default Level
1: Monitor level
Parameters
by-linenum: Specifies to display the number of each line.
Description
Use the display this command to display the validated configuration under the current view.
After finishing a set of configurations under a view, you can use the display this command to check
whether the configuration takes effect.
Note that:
z
A parameter is not displayed if it has the default configuration.
z
A parameter is not displayed if the configuration has not taken effect.
z
When you use the command in a user interface view, the command displays the valid configuration
in all the user interfaces.
z
When you execute the command in any VLAN view, the command displays configuration of all the
VLANs.
Examples
# Display the valid configuration information of the current view (the output information depends on the
current configuration of the device).
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] display this
#
user-interface aux 0
user-interface vty 0
history-command max-size 256
user-interface vty 1 4
#
return
# Display the valid configuration information on interface Ethernet 2/0/1 (the output information depends
on the current configuration of the device).
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] display this
#
interface Ethernet2/0/1