Справочное Руководство для 3com S7906E

 

1-21 

2: System level 

file-name: File name, whose extension name must be .cfg. 

safely: Sets the configuration saving mode to safe. If this argument is not specified, the configuration 

file is saved in fast mode. 

Use the save file-name command to save the current configuration to the specified configuration file, 

but the system will not specify the file as the startup configuration file for the next system startup. If the 

file specified by file-name does not exist, the system will create the file and then save the configuration 

to the file. 

Use the save [ safely ] command to save the current configuration to a configuration file and specify the 

file as the startup configuration file for the next system startup. 

Note that: 

If you use the save file-name command, even if the configuration file auto-save function is enabled, the 

SMB does not automatically save the current configuration to its own configuration file. If you do not 

specify the file-name argument, the SMB automatically saves the current configuration when the AMB 

executes the save  [ safely ] command. 

Related commands: reset saved-configuration, display current-configuration, display 

saved-configuration. 

# Save the current configuration file to the default directory. 

<Sysname> save 

The current configuration will be written to the device. 

Are you sure? [Y/N]:y 

Please input the file name(*.cfg)[flash:/testcfg.cfg](To leave the 

existing filename unchanged, press the enter key): 

flash:/testcfg.cfg exists, overwrite?[Y/N]:y 

 

Validating file. Please wait... 

Now saving current configuration to the device. 

Saving configuration flash:/testcfg.cfg. Please wait... 

. 

Configuration is saved to flash successfully. 

<Sysname> 

slave auto-update config 

undo slave auto-update config