Справочное Руководство для 3com S7906E
1-21
Table 1-11 display cfd remote-mep command output description
Field
Description
MEP ID
ID of the remote MED
MAC Address
MAC address of the remote MEP device
State
Running state of MEP, either OK or FAILED
Time
Recent time of the remote MEP when it is FAILED or OK.
MAC Status
State of the port indicated by the last CCM received from the remote
MEP, either UP or DOWN
MEP, either UP or DOWN
display cfd service-instance
Syntax
display cfd service-instance [ instance-id ]
View
Any view
Default level
2: System level
Parameters
instance-id: Service instance, ranging from 1 to 32767.
Description
Use the display cfd service-instance command to display the configuration information of service
instance.
Without specifying the service instance ID, the command will display the configuration information of all
service instances. With service instance ID specified, this command will display the configuration
information of the specified service instance.
Examples
# Display the service instance configuration information.
<Sysname> display cfd service-instance
2 service instance(s) configured:
Service instance 5:
Maintenance domain: mdtest_5
Maintenance association: matest_5
Level: 5 VLAN: 5 MIP rule: None CCM interval: 1s
Service instance 6:
Maintenance domain: mdtest_6
Maintenance association: matest_6
Level: 6 VLAN: 6 MIP rule: None CCM interval: 1s