3com S7906E Guía De Referencia

 

1-21 

Table 1-11 display cfd remote-mep command output description 

MEP ID 

ID of the remote MED 

MAC Address 

MAC address of the remote MEP device 

State 

Running state of MEP, either OK or FAILED 

Time 

Recent time of the remote MEP when it is FAILED or OK. 

MAC Status 

State of the port indicated by the last CCM received from the remote 
MEP, either UP or DOWN 

 

display cfd service-instance [ instance-id ] 

Any view 

2: System level 

instance-id: Service instance, ranging from 1 to 32767. 

Use the display cfd service-instance command to display the configuration information of service 

instance. 

Without specifying the service instance ID, the command will display the configuration information of all 

service instances. With service instance ID specified, this command will display the configuration 

information of the specified service instance. 

# Display the service instance configuration information.  

<Sysname> display cfd service-instance 

2 service instance(s) configured: 

Service instance 5: 

Maintenance domain: mdtest_5 

Maintenance association: matest_5 

Level: 5        VLAN: 5        MIP rule: None         CCM interval: 1s 

 

Service instance 6: 

Maintenance domain: mdtest_6 

Maintenance association: matest_6 

Level: 6        VLAN: 6        MIP rule: None         CCM interval: 1s