Справочное Руководство для 3com S7906E
1-4
Description
Use the patch delete command to delete the specified patch and all the patches before the specified
patch number.
This command only removes the patches from the memory patch area, and it does not delete them from
the storage medium. The patches are in the IDLE state after execution of this command.
If you execute this command without specifying slave or slot-number, the command deletes the
specified patch(es) on the active main board.
Examples
# Delete patch 3 and all the patches before patch 3 on board 5.
<Sysname> system-view
[Sysname] patch delete 3 slot 5
patch load
Syntax
patch load [ slave | slot slot-number ]
View
System view
Default Level
3: Manage level
Parameters
slave: Specifies the standby main board.
slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the
device model.
Description
Use the patch load command to load the patch file on the Flash to the memory patch area of the
system.
The patch files of the main board, interface board, and L3+ board are patchmain, patchio, and
patchl3plus respectively.
The active main board and the standby main board load their patch files from their own Flash. The
administrator needs to ensure the consistency of the patch files on the active and standby main boards.
If you execute this command without specifying slave or slot-number, the command loads the patch file
to the active main board.
Examples
# Load the patch file for board 3.
<Sysname> system-view
[Sysname] patch load slot 3