Краткое Руководство По Установке для 3com S7906E

 

3-7 

Figure 3-9 Connect the AC power cable for the PSR1400-A 

 

 

To connect the AC power cable for the PSR1400-A, proceed as follows: 

1)  Use a Phillips screwdriver to screw off the right part of the power cable retainer suite. 

2)  Plug one end of the power cable shipped with the switch into the power socket and fasten the left 

part of the power socket retainer suite to the other part to lock the power cable. 

3)  Plug the other end into the AC power socket strip, which is connected to the AC power supply in the 

equipment room. 

There are two AC power inputs on the PSR2800-ACV power module, one for system power and the 

other for PoE power. The connection of the power cable for each power input is the same as that of the 

PSR1400-A. For the detailed connection method, refer to section  “

” on 

 

Since the busbars used in equipment rooms are typically for 10A power cables, but the PSR1400-A 

power module and PSR2800-ACV power module require a 16A power cable (AC), you need to provide 

a busbar suitable for 16A power cables. Refer to Appendix B “AC Power Cables Used in Different 

Countries or Regions“ for AC power cable specifications.