Инструкция С Настройками для ONKYO ht-s680

34

On the remote controller, the [V1], [V2], and [V3] buttons select the VIDEO 1/VCR, 
VIDEO 2, and VIDEO 3 input sources respectively.

Use the SPEAKERS [A] and [B] buttons on the AV receiver or the [SP A/B] 
button on the remote controller to select the speaker set that you want to 
use.
Pressing the remote controller’s [SP A/B] button cycles through the following settings: 
Speaker Set A 

→

 Speaker Set A&B 

→

 Speaker Set B 

→

 Off.

The A and B speaker indicators show whether 
each speaker set is on or off.
Note that when speaker set B is turned on, 
speaker set A is reduced to 2.1-channel playback.

Start playback on the source component.
When you select DVD or another video component, on your TV you’ll need to select 
the video input that’s connected to the AV receiver’s MONITOR OUT.

To adjust the volume, use the MASTER VOLUME control, or the remote 
controller’s [VOL] button.
The volume can be set to MIN, 1 through 79, or MAX. The AV receiver is designed for 
home theater enjoyment and has a wide volume range for precise adjustment.

To set the level of the subwoofer, use the OUTPUT LEVEL control.
Because our ears are less sensitive to very low bass sounds, there’s a temptation to set 
the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what 
you think is the optimal level, and then back it off slightly.

Select a suitable listening mode and enjoy!
See page 40.

Indicators