Руководство Пользователя для Samsung ppm63m7

Installing Batteries in the Remote Control
1  Remove the cover on the rear of the remote control by 

pressing the symbol (

) downwards and then pulling firmly to 

remove it.

2  Install two AAA size batteries.

➢ 

 

Make sure to match the “

+” and “–” ends of the 

batteries with the diagram inside the compartment.

 

Do not mix battery types, i.e. alkaline and manganese.

3  Replace the cover by aligning it with the base of the remote 

control and pressing it back into place.

➢ 

Remove the batteries and store them in a cool and dry 

place if you won’t be using the remote control for a long 

time. The remote control can be used up to about 23 feet 

from the PDP Display. (Assuming typical PDP Display 

usage, the batteries last for about one year.)

➢ 

If the remote control doesn’t work! Check the following:

1. Is the PDP Display power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

The power cord is attached to the rear of the PDP Display.
1  Plug the power cord into an appropriate socket.

➢ 

The main voltage is indicated on the rear of the PDP Display and the frequency is 50 or 60Hz.

2  Press the   (Power) button (On/Off) on the front of the PDP Display or press the ON button on the 

remote control to switch the PDP Display on. 

3  To switch the PDP Display off, press the   (Power) button (On/Off) on the front of the PDP Display or 

press the 

OFF button on the remote control.

BN68-01364A-02Eng_1009.indd   8

2007-10-09   ¿ÀÈÄ 2:24:00