Руководство Пользователя для Samsung ppm63m7
English - 9
Installing the Display Vertically
Before Using the Video Wall and the Multiple Display Control
function
1 Please create an ID for each PDP Display before
installing them close together. It may be difficult to
create IDs for the PDPs with the remote control
when they are installed close to each other.
(Refer to page 24)
2 For details about Video Wall configuration and
operation, refer to “Setting the Multiple Screen” on
page 25.
Samsung shall not be liable for damages
caused by installing the product in a
different direction from the figure above.
You can install the PDP Display vertically. In this
case, the fan automatically works. If you wish to
stop the fan, position the PDP Display horizontally
and then set
Fan to Off in the Function menu.
Please use a wall attachment panel when installing
vertically. The unit must be installed with the menu
buttons on the left when viewed from the front.
Example for 2x2 Video Wall function
Continued...
Examples of 2x2 Video Wall connections
Rear of the PDP Display
Y/P
B
/P
R
L/R
DVD
Distributor
2
1
1 Connect the Component IN port of the distributor and the Component OUT port of the device (such as a
DVD player) that supports the Component interface using the Component video and audio cables.
2 Connect the Component IN port on the rear panel of each PDP and the Component OUT port of the
distributor using the Component video and audio cables. (A distributor has multiple Component OUT ports.)
BN68-01364A-02Eng_1009.indd 9
2007-10-09 ¿ÀÈÄ 2:24:04