Руководство Пользователя для Innovaphone ip100

Manual IP 100 version 5.01 

Page 19

Fig. 9 Holding a call

1. During a call press the 

 key. The call is put on hold. You will hear a dial

tone on Line 2 and the phone ready symbol 

 will appear. The held

connection is shown in the first line of the display.

2. Enter the second phone number and confirm with the 

 key. A second

connection will be established and shown underneath the held call.
Either the number or the name of the person called will appear in the
display. The active connection is shown by a symbol with two connected
phones (see fig. 9).

3. To end the second call, either press the loudspeaker key 

 or hang up.

Confirm with OK, and you will be reconnected to Line 1, your first call. 

You can switch between two connections using the switch function.
During a conversation with one active (Line 1) and one held connection (Line 2),
press the 

 key and you will be connected with the held party (Line 1).

The active party is now put on hold. The status line changes to the held party
(Line 2), so that at any time, by pressing the 

 key, you can switch to Line 1

(see fig. 9).

You are making a call and would like to transfer it to another party.

1. During the call press the 

 key.

The call is placed on hold. You will hear a dial tone on Line 2. 

2. Enter the number.

The connection will be established. If the called party answers, this can be
treated like a second call, as above. 

3. To connect the two parties, press the service key 

, scroll with the arrow

keys  

to 

Transfer and confirm with the 

 key. The caller will be

connected. You can preconfigure a function key for this activity.

00:00:01        

Smith

 

Henry