Руководство Пользователя для Glyph cy-misan-v

SCSI Configuration

SCSI HBA Ports

Depending on the miSAN-V series configuration, there will be HBA 1 and HBA2, or
HBA 1a, HBA1b, HBA2a, and HBA2b. HBA 2 will normally be connected to a host,
though it may be configured to connect to a target.

Choose betwen 

Connects to host and Connects to devices. 

This item controls the SCSI IDs for virtual devices which are presented to host sys-
tems, and has no connection with the actual SCSI ID settings for any attached physi-
cal devices. This setting and the “Device ID Order” setting below have no effect and
will not be displayed on an iSCSI-only system.

This item sets the base (lowest numbered) SCSI ID that the unit uses. Default is 

2.

These are the SCSI IDs that will be seen by the host computer system. Available
selections are 

0 through 15. The miSAN-V-Series will use one SCSI ID for each

installed device (tape drive or changer), assigning SCSI IDs consecutively beginning
with the Base SCSI ID.