Release Note для Spectra Logic spectra t120
User Guide Updates
66
3. Open the folder to verify that it contains a file called
cminfo_<date-time>.zdt
or
cminfo_<date-time>.dat
, where
date-time
is the time stamp for when the
backup was created, and that the file is more than 0 bytes in size.
4. If a file with the format is present and is more than 0 bytes in size, the database
backup was successful and the file is usable. Store the USB storage device in a safe
location.
location.
5. If the MLM database file is not present or if it is 0 bytes in size, repeat the backup
process (Backing Up the MLM Database on page 64) using a different USB storage
device.
device.
Email Attachment
1. Open the email attachment and verify that it contains a zip file called
cminfo_<date-time>.zdt
. is present and that it is more than 0 bytes in size.
2. If the zip file is present, the backup was successful and is usable. Save the email
attachment to a safe location from which you can copy it to a USB device, if
needed.
needed.
If the zip file is not present, repeat the backup process (Backing Up the MLM Database
on page 64) to generate the email again.
on page 64) to generate the email again.
Using Shared Entry/Exit Port
When the Entry/Exit port is configured as Shared, the General Status screen shows
nine Entry/Exit slots instead of eight (shown circled in Figure 22). The ninth slot,
called the export slot, is created so that the library can hare the EE port across
partitions. The ninth slot is a virtual slot and only exists in the library software; it is
not a real slot.
nine Entry/Exit slots instead of eight (shown circled in Figure 22). The ninth slot,
called the export slot, is created so that the library can hare the EE port across
partitions. The ninth slot is a virtual slot and only exists in the library software; it is
not a real slot.
Figure 22 The General Status Screen with 8 total E/E slots.