Руководство Пользователя для Spectra Logic spectra t120
Chapter 15. Advanced Configuration & Use
162
Using the LC to Access Individual Tapes
Typically, all individual tape moves are handled through the backup software. In rare
instances, you may need to access one or a few tapes. Follow the steps in this section
to handle these tasks.
instances, you may need to access one or a few tapes. Follow the steps in this section
to handle these tasks.
Overview of Importing
In the Spectra T950 library, you need to identify an empty slot in a TeraPack container
into which a newly imported tape cartridge goes. Then you can import the cartridge.
into which a newly imported tape cartridge goes. Then you can import the cartridge.
Use the Inventory screen () to access the TeraPack container and import or export the
single tape(s), as shown in Figure 15-4.
single tape(s), as shown in Figure 15-4.
Importing a Tape in a TeraPack Container into an Empty
Chamber
Chamber
To import one or more individual tape cartridges loaded in a TeraPack container into
an empty chamber in the library, use the bulk import function. This is described in
Bulk Imports on page 109.
an empty chamber in the library, use the bulk import function. This is described in
Bulk Imports on page 109.
Figure 15-4 Importing an individual tape.
1
2
1
3
4
2
3
4
1
2
3
1
2
3
4
Identify an empty
slot in a TeraPack
container.
slot in a TeraPack
container.
Export the TeraPack container
with the empty slot and insert
the cartridge.
with the empty slot and insert
the cartridge.
Import the TeraPack
container containing the
newly inserted cartridge.
container containing the
newly inserted cartridge.