Руководство Пользователя для Spectra Logic spectra t120
Chapter 7. Configuring the Library
83
Configuring General Library Functions
Use the Other Settings portion of the System Setup screen (Figure 7-3) to configure or
re-configure the library’s system settings, described in the following sections:
re-configure the library’s system settings, described in the following sections:
Refresh Rate
The refresh rate is the rate at which the LC regularly refreshes information for viewing
by the user. The default refresh rate is 60 seconds. To change the refresh rate for the
LC, follow these steps.
by the user. The default refresh rate is 60 seconds. To change the refresh rate for the
LC, follow these steps.
1. Under Other Settings in the System Setup screen (Figure 7-3), use the Refresh
drop-down menu to select a scheduled interval time.
2. Select Save.
Note: The LC can be refreshed as needed at any time by selecting the
refresh button located at the left end of the status bar (see Status
Bar on page 34).
Bar on page 34).
Date and Time
The date and time set on the library is used only for library system messages; it is not
written to the tape or disk. To set the date and time displayed on the library, follow
these steps.
written to the tape or disk. To set the date and time displayed on the library, follow
these steps.
drop-down menus to select the month, day (date), year, hour, and minute of the
hour to display.
hour to display.
2. Select Set Time.