Release Note для Spectra Logic spectra t120

User Guide Updates — Configuring the Library

Release Notes 

90940002

The BlueScale Observatory application lets you to monitor and manage 
multiple Spectra Logic libraries from a single remote location. Observatory 
arrives on a software CD for you to install on your computer system.

Observatory includes two keyed options to enable Simple Network 
Management Protocol (SNMP) and Secure Sockets Layer (SSL) 
functionality.

The instruction booklet included with the Observatory installation CD 
provides complete installation and configuration instructions. Additional 
information is available from the Observatory online help. After you install 
Observatory, configure it with the IP address for each Spectra Logic library 
you want to display in Observatory.

If you want to use the SNMP and SSL options included with Observatory, 
use the following steps to enter the Observatory option key on each library 
you want to monitor.

Note:

It is not necessary to enter Observatory option key if you do not 
want to use the SNMP and SSL options.

1. Enter the Observatory option keys as described in the Spectra T950 

Library User Guide.

2. Scroll down the System Configuration screen to the Other Settings pane 

and set the Web Server Port. 

3. Click Save.

4. Close all browsers accessing the library, then reset the LCM.

5. Repeat Steps 1 through 4 for each additional library you want to 

monitor.

Caution

Do not set the web server port to 443 when using SSL. Using this port number will 
cause the front panel display to become unstable.

Caution

Failure to reset the LCM will result in communication errors when you access the 
user interface