Release Note для Spectra Logic spectra t120
Spectra T950 Library Firmware — BlueScale10.5.0-20081121F
212
Release Notes
90940002
Resolved Issues
A Configuration Error screen stating that “You must provide a problem
description for a new support ticket.” no longer displays when you
select Send Log Set on the AutoSupport screen.
select Send Log Set on the AutoSupport screen.
Submitting an AutoSupport ticket in the Hardware Health Monitoring
screen now correctly takes you to the default AutoSupport page.
The library no longer loses the SNMP connection when the LCM is
reset.
Known Issues
Problem
Workaround
General
Saving Auto Support ticket does not update
progress bar in progress window.
progress bar in progress window.
Be patient. The progress bar does not indicate
changes until it is finished.
changes until it is finished.
Front panel or RLC moves that are initiated
immediately after creating a partition are not
updated in the QIP because the library has not
completed updating QIP inventory at the time
the move is initiated.
immediately after creating a partition are not
updated in the QIP because the library has not
completed updating QIP inventory at the time
the move is initiated.
Allow sufficient time for the library to update the
QIP inventory after creating a partition.
QIP inventory after creating a partition.
With Auto-Configuration Save and MLM
enabled, the wording in the email sent when
you edit a partition is identical to the wording in
the one sent by the Auto-Configuration Save
feature, even though the attached configuration
files are different.
The configuration file sent by the Auto-Save
enabled, the wording in the email sent when
you edit a partition is identical to the wording in
the one sent by the Auto-Configuration Save
feature, even though the attached configuration
files are different.
The configuration file sent by the Auto-Save
Configuration feature includes the MLM
database.
database.
The email sent when you save the library
configuration after editing a partition does
not include the MLM database.
not include the MLM database.
Examine the zip file attached to determine which
type of configuration file it contains.
Auto-save files are named <date-time>cfg.zip,
type of configuration file it contains.
Auto-save files are named <date-time>cfg.zip,
where <date-time> is the time stamp for when the
file was created.
file was created.
Open the zip file sent when you update a
partition and confirm that it contains a number
of configuration files of the format cnnnnnn.cfg,
where n is a number between 0 and 9, are
present.
of configuration files of the format cnnnnnn.cfg,
where n is a number between 0 and 9, are
present.
When you disable and then re-enable power
consumption monitoring, the library does not
begin capturing data until you power cycle the
library.
consumption monitoring, the library does not
begin capturing data until you power cycle the
library.
Power cycle the library to begin capturing the
power consumption monitoring data again.
power consumption monitoring data again.
Tape Drive Firmware
An LTO-2 drive will not load a tape using
DCM 3.18 firmware.
DCM 3.18 firmware.
Upgrade the DCM firmware to the current version.
Note: Always update your library to the most
current code available.
Note: Always update your library to the most
current code available.