Release Note для Spectra Logic spectra t120
Preparing Media for Use
December 2008
Spectra T950 Library
65
3. Insert the prepared cartridges into the TeraPack magazine. Make sure
that the cartridges are oriented with the hub side toward the front of
the TeraPack magazine, as illustrated in
the TeraPack magazine, as illustrated in
.
RXT Media
Depending on whether you plan to write data to the RXT media or restore
data from a the RXT media, set the write-protect switch, shown in
data from a the RXT media, set the write-protect switch, shown in
, for the desired operation before you import the RXT media pack
into library.
Important
If you are preparing a TeraPack magazine for a cleaning partition, do not put data
cartridges in the magazine. The library rejects any magazine containing data
cartridges by reopening the TAP door without moving the magazine into the
partition. The library will warn you if you attempt to import cartridges that do not
have bar code labels.
cartridges in the magazine. The library rejects any magazine containing data
cartridges by reopening the TAP door without moving the magazine into the
partition. The library will warn you if you attempt to import cartridges that do not
have bar code labels.
Make sure the TeraPack magazines that contain cleaning cartridges have a bar
code label with a CL prefix. The library rejects any magazine that does not have a
CL prefix by reopening the TAP door without moving the magazine into the
partition.
code label with a CL prefix. The library rejects any magazine that does not have a
CL prefix by reopening the TAP door without moving the magazine into the
partition.
Figure 23 Insert prepared cartridges into the TeraPack magazine
(LTO cartridges shown).
(LTO cartridges shown).
Figure 24 Setting the RXT media pack write-protect switch.
Cartridge hub
Front of TeraPack magazine
(note textured surface on each side)
(note textured surface on each side)
Cartridge bar code label
Bar code label
Write-protect switch