Release Note для Spectra Logic spectra t120
Modifying an Existing Partition
December 2008
Spectra T950 Library
93
Modifying an Existing Partition
Select the Partition to Change
Use the following steps to edit an existing partition.
1. Log into the library with superuser or administrator privileges.
To change user types, select Security > Switch User from the toolbar
menu, then log in as a user with the required privileges.
menu, then log in as a user with the required privileges.
If you need to modify encryption settings for the partition, log into the
library as a superuser, then select Security > Encryption. The
Encryption User Login screen displays. Type the encryption user
password, then select OK to display the Encryption configuration
screen. See
library as a superuser, then select Security > Encryption. The
Encryption User Login screen displays. Type the encryption user
password, then select OK to display the Encryption configuration
screen. See
for detailed
information about enabling and configuring encryption for a partition.
Caution
If you plan to reduce the number of chambers assigned to a partition, physically
export any media in those chambers, as described in the
export any media in those chambers, as described in the
Spectra T950 Library User
Guide,
before you remove chambers from the partition.
By default, the library deletes empty chambers from a partition first. However, if all
chambers are full, the library is forced to delete populated chambers. When this
happens, the media packs in the deleted chambers are no longer accessible. You
must add the chambers to either a new or an existing partition before the media
packs can be accessed again.
chambers are full, the library is forced to delete populated chambers. When this
happens, the media packs in the deleted chambers are no longer accessible. You
must add the chambers to either a new or an existing partition before the media
packs can be accessed again.
Figure 37 The Encryption User Login screen.
Start Encryption
application