Инструкция для Sony SU-WL700

Скачать
Страница из 68
(GB)
Be careful not to subject the Display to 
shock during installation.
If the Display is exposed to shock, it may fall or break apart. This 
may cause injury.
Be sure to install the Display on a wall that 
is both perpendicular and flat.
If you fail to do so, the Display may fall and cause injury.
After proper installation of the Display, 
secure the cables properly.
If people or objects get tangled with cables, this may result in injury 
or damage to the Display.
Do not allow the AC power cord or the 
connecting cable to be pinched.
 
If the AC power cord or the connecting cable 
is pinched between the unit and the wall or is 
bent or twisted by force, the internal 
conductors may become exposed and cause a 
short circuit or an electrical break. This may 
cause a fire or an electric shock.
Be careful not to hurt your hands or fingers 
during the installation.
Be careful not to hurt your hands or fingers when installing the 
Wall-Mount Bracket or the Display.
The screws needed to secure the Wall-
Mount Bracket to the wall are not supplied.
Use the appropriate screws for the wall material and structure when 
mounting the Wall-Mount Bracket.
Before assembling
• Have the Display’s operating instructions at hand before 
installation.
• Refer to the assembly sheet when there is a 
 mark 
appended to the procedure.
 Arrow direction in the assembly sheet indicates the 
front face of the Display.
• Be sure to have a Phillips screwdriver that fits the screws 
prior to the assembly.
Design and specifications are subject to change without 
notice.
Preparation
Installation procedure differs depending on your Display. 
Follow the instructions in this manual referring to the 
assembly sheet.
Specifications
Dimensions: 
mm (inches)
a
445 (17 
5
/
8
)
b
406 (16)
c
320 (12 
5
/
8
)
d
364 (14 
3
/
8
)
Weight:
4 kg (9 lb 142 oz)
d
c
b
a