Справочник Пользователя для Nikon D600

236

U

Choose the flash mode for the built-in flash.

❚❚Manual

Choose a flash level between Full and 1/128 (

1

/

128

 of full power). At full power, the 

built-in flash has a Guide Number of 12/39 (m/ft, ISO 100, 20°C/68°F).

❚❚Repeating Flash

The flash fires repeatedly while the shutter is open, producing 
a strobe-light effect. Press 4 or 2 to highlight the following 
options, 1 or 3 to change.

G

 button ➜ A Custom Settings menu

1 TTL

Flash output is adjusted automatically in response to shooting 
conditions.

2 Manual

Choose the flash level (0 236). The camera does not emit monitor pre-
flashes.

3 Repeating flash

The flash fires repeatedly while the shutter is open, producing a strobe-
light effect (0 236).

4 Commander mode

Use the built-in flash as a master flash controlling remote optional flash 
units in one or more groups (0 237).

Choose flash output (expressed as a fraction of full power).

Choose the number of times the flash fires at the selected 
output. Note that depending on shutter speed and the 
option selected for Frequency, the actual number of flashes 
may be less than selected.

Choose how often the flash fires per second.

A

The flash control mode for the built-in flash is shown in the 
information display (0 146).

A

Y icons flash in the control panel and viewfinder when these options are selected.