Справочник Пользователя для Canon REALiS WUX10

44

■When the Password Input Screen Appears

If you have set a password, the Password input screen appears. Enter your password. 
(

)

■When "No signal" Appears

A notebook computer requires to turn on the external monitor output. (

)

Press the INPUT button to select an appropriate input signal. (

)

■When Notebook Computer Screen Does Not Appear

Set your notebook computer to output signals to an external monitor. For more details, 
refer to "Changing Notebook Computer Screen Output" below.

■Adjusting Image

• For the display resolution of the computer, select "1920 x 1200 pixels" or a resolution 

closest to the output signal resolution of the computer. (

)

• Use the auto PC function to adjust shift in computer image or the flickering of the 

screen. (

• Use  the  ZOOM button to adjust the size of the projecting image. (

• Use  the  FOCUS button to correct the focus adjustment if necessary. (

• Use the D.SHIFT/KEYSTONE button to adjust keystone correction if necessary. (

)

• Select the aspect ratio of the projecting image (screen aspect) or a screen mode 

(aspect) according to the aspect ratio of the screen, type of input image signal and so 
on. (

 - 

)

• Select an image mode depending on the projecting image. (

To use a notebook computer, you need to change the screen output on the notebook 
computer.
This operation is not required for a desktop computer.

■Turning On External Monitor Output

You can turn on the external monitor output via keyboard operation.
To turn on the external monitor output, press an icon for an external monitor or a function 
key ([F1] to [F12]) while holding [Fn] key down.

The function keys you use and the method used to turn on the external monitor output vary 
depending on the model. For details, see the instructions of your notebook computer.

While holding 

 key

Press a key such as 

 or