Инструкция для Canon imagePROGRAF iPF680

Menu items are as follows.
The printer menu is classified into regular menu items available when no print job is in progress and menu during print-
ing items only available while printing is in progress. 

Regular menu

Menu during printing

Not displayed

 as normal is displayed.

 as normal is displayed.

 containing the following items is displayed.

Adj. Fine Feed (

  *1: Only displayed in the menu during printing. Not displayed in the regular menu.

For details on the displayed menu hierarchy, 

The Paper Menu is not displayed during printing.

Setting Item

Description, Instructions

Select either sheets or rolls and load the paper.

Choose this item before removing loaded paper.

Chg. Paper Type (

Change the size of paper loaded. 

Choose On to print a barcode at the end of a roll before you remove
it. The printed barcode can be used in managing the amount of roll
paper left. Choose Off if you prefer not to print the barcode.

(The type of paper
is displayed here.)
(

)

Adjust the Printhead height. 

If you print on Japanese paper (washi) or other handmade paper
that has an irregular width, choose Loose for a higher skew detec-
tion threshold, or choose Off to disable skew detection. However, if
paper is loaded askew when detection is Off, note that paper jams
or Platen soiling may occur.

Specify whether or not to cut with the standard round-bladed cutter.
If you choose Automatic, the roll will be cut automatically using the
Cutter Unit, depending on the printer driver settings.
Select Eject to prevent printed documents from falling immediately
after printing such as when you wait for the ink to dry, etc. Manual
prints lines at the cut position instead of cutting after printing.

Choose the cutting speed. The preset selection represents the opti-
mal cutting speed for the type of paper. We recommend keeping the
preset cutting speed.
If you use adhesive paper, choosing Slow helps prevent adhesive
from sticking to the cutter and keeps the cutter sharp.

Selects whether or not to automatically cut the leading edge of the
roll paper when roll paper is loaded.

Menu Settings

                                                                                                                                                                                                               

iPF680

                                                                                                                                                                                                                             

Control Panel

Printer Menu

 

456