Справочник Пользователя для ASUS PIKE 2108

ASUS PIKE 2108

2-39

3.  Perform one of the following steps:
 

•   Click Preview to preview the 

foreign configurations. The 

Foreign Configuration Preview 

screen appears, as shown in 

the right figure.

 

•   Click Clear to clear the foreign 

configurations and reuse the 

drives for another virtual drive.

 

If you click Cancel, it cancels the 

importation or preview of the foreign 

configuration.

 

The right panel shows the virtual drive properties of the foreign configuration. 

In this example, there are two RAID1 virtual drives with 67.843GB each. The 

left panel shows the drives in the foreign configuration.

4.  Click Import to import this foreign configuration(s) and use it on this 

controller.
Foreign Configurations in Cable Pull and Disk Removal Scenarios

If one or more drives are removed from a configuration, by a cable pull or 

drive removal, for example, the configuration on those drives is considered a 

foreign configuration by the RAID controller.
Use the Foreign Configuration Preview screen to import or clear the 

foreign configuration in each case.
The following scenarios can occur with cable pulls or physical drive removals.

If you want to import the foreign configuration in any of the following scenarios, 

you should have all the drives in the enclosure before you perform the import 

operation.

1.  Scenario #1: If all of the drives in a configuration are removed 

and re-inserted, the controller considers the drives to have foreign 

configurations.

 

Import or clear the foreign configuration. If you select Import, automatic 

rebuilds will occur in redundant virtual drives.

Start a consistency check immediately after the rebuild is complete to ensure 

data integrity for the virtual drives.

2.  Select a configuration or All Configurations.