Инструкция для Canon imagePROGRAF iPF6400SE
Cause
Corrective Action
The Platen suction is too strong.
BordlessOversize is set to Standard in the Control Panel menu.
Set BordlessOversize to Little in the Control Panel menu.
Immediately after borderless printing, the trailing edge margin is soiled during regular printing
Immediately after borderless printing, the trailing edge margin is soiled during regular printing
Cause
Corrective Action
Depending on your printing environment, after bor-
derless printing in which the leading and trailing
edge of the roll is cut automatically, any ink adher-
ing to the cutter unit may rub off on the next printed
document.
derless printing in which the leading and trailing
edge of the roll is cut automatically, any ink adher-
ing to the cutter unit may rub off on the next printed
document.
Follow these steps to change the Between Pages setting of Drying Time to a val-
ue between about 30 seconds and 3 minutes before trying borderless printing
again.
ue between about 30 seconds and 3 minutes before trying borderless printing
again.
1.
On the Main sheet of the printer driver, click Advanced Settings by Media
Type.
Type.
2.
Select an ink drying time in the list for the Between Pages setting of Drying
Time.
Time.
Printed colors are inaccurate
Printed colors are inaccurate
Cause
Corrective Action
Color adjustment has not been activated in the Ad-
vanced Settings of the printer driver.
vanced Settings of the printer driver.
In the Advanced Settings of the printer driver, access Color Settings in Color
Mode to adjust colors.
Mode to adjust colors.
Colors have not been adjusted on the computer or
monitor.
monitor.
Refer to the computer and monitor documentation to adjust the colors.
Adjust the settings of the color management software, referring to the software
documentation as needed.
documentation as needed.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if they are clogged.
In the Windows printer driver, Application Color
Matching Priority is not selected.
Matching Priority is not selected.
Click Special Settings on the Layout sheet of the printer driver and select Appli-
cation Color Matching Priority in the dialog box.
cation Color Matching Priority in the dialog box.
Color may change slightly even on the same model
of printer if you use a different version of the firm-
ware or printer driver, or when you print under differ-
ent settings or in a different printing environment.
of printer if you use a different version of the firm-
ware or printer driver, or when you print under differ-
ent settings or in a different printing environment.
Follow these steps to prepare the printing environment.
1.
Use the same version of firmware or printer driver.
2.
Specify the same value for all settings items.
Banding in different colors occurs
Banding in different colors occurs
Cause
Corrective Action
The paper feed amount is out of
adjustment.
adjustment.
Adjust the feed amount.
If printed sheets are affected by banding in different colors by the trailing edge (about 20–30 mm
(0.8–1.2 in) from the edge), try adjusting the feed amount of the trailing edge of sheets.
(0.8–1.2 in) from the edge), try adjusting the feed amount of the trailing edge of sheets.
Printing does not proceed smooth-
ly because print jobs are interrup-
ted during transmission.
ly because print jobs are interrup-
ted during transmission.
Exit other applications and cancel other print jobs.
In the Control Panel menu, Adj.
Priority is set to Print Length.
Priority is set to Print Length.
Setting Adj. Priority to Print Quality in the Control Panel menu and adjusting the feed amount
may improve results.
may improve results.
The Printhead is out of alignment.
Adjust the Printhead alignment.
Immediately after borderless printing, the trailing edge margin is soiled during regular printing
iPF6400SE
Troubleshooting
Problems with the printing quality
624