Инструкция для Canon imagePROGRAF iPF6400SE
This paper cannot be used.
This paper cannot be used.
Cause
Corrective Action
Paper that is too small for the printer has been loa-
ded.
ded.
Press the OK button and load paper of the correct size.
Paper has been loaded that is too small to print the
test pattern for printhead adjustment or nozzle
checking.
test pattern for printhead adjustment or nozzle
checking.
Press the OK button and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.
than one sheet may be required depending on the adjustment.
Roll printing is selected.
Roll printing is selected.
Cause
Corrective Action
You have attempted to print on a roll, but
no roll is loaded.
no roll is loaded.
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,
and then print.
and then print.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Roll printing is selected, but manual paper is loaded.
Roll printing is selected, but manual paper is loaded.
Cause
Corrective Action
A print job for rolls was received when a sheet is
loaded.
loaded.
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet.
2.
Load a new roll.
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
The roll is empty.
The roll is empty.
Cause
Corrective Action
The roll is empty.
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Press the OK button and remove the roll.
2.
Load the new roll.
3.
If no barcode was printed on the roll, specify the type of paper.
4.
When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on
the roll, also specify the paper length.
the roll, also specify the paper length.
There is remaining
roll paper, but be-
cause it could not
be advanced, it
could not be detec-
ted.
roll paper, but be-
cause it could not
be advanced, it
could not be detec-
ted.
The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to change the
printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
iPF6400SE
This paper cannot be used.
Error Message
Messages regarding paper
645