Инструкция для Canon imagePROGRAF iPF770 MFP L36
Other Messages
Other Messages
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause
Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause
Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon
dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause
Corrective Action
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
was not advanced because the trailing edge is taped to the roll.
Turn off the printer and remove the roll from the printer before re-
storing power.
storing power.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
Top Cover.
Turn off the printer, open the Top Cover and remove the tape or
the Belt Stopper before restoring power.
the Belt Stopper before restoring power.
An error requiring service may have occurred.
Turn off the printer and wait at least three seconds before restor-
ing the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for
assistance.
ing the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for
assistance.
GARO Wxxxx (x represents a number)
iPF770
Error Message
Other Messages
626