Инструкция для Canon imagePROGRAF iPF785 MFP M40

Important

If you use paper other than genuine Canon paper and feed confirmed paper, Canon provides absolutely no guaran-
tees regarding print quality or paper feed properties. Refer to Paper Reference Guide for details on genuine Canon
paper and feed confirmed paper. 

Load paper in the printer and then select the paper type in the control panel and printer driver and print.
You can print easily by selecting from existing settings provided in the printer control panel and printer driver. 

You can easily print on paper other than genuine Canon paper and feed confirmed paper without making complicated
settings by selecting existing settings provided in the printer control panel and printer driver depending on the media
type you are using. The existing settings consist of general-purpose paper settings provided for each media type and
special settings that allow you to select the amount of ink to use.

Important

The genuine Canon paper settings provided in the printer control panel and printer driver are optimized for genuine
Canon paper. If these settings are selected for printing on paper other than genuine Canon paper, the ink may bleed
or the printhead may rub against the paper. In order to easily print on paper other than genuine Canon paper and
feed confirmed paper, we recommend that you select one of the following general-purpose paper settings or special
settings.

Note

For an overview of the media types, 

For details on how to select the media type in the control panel and printer driver, 

Choosing General-Purpose Paper Settings

Since these settings anticipate a wide variety of paper other than genuine Canon paper and feed confirmed paper,
these settings will make it difficult for bleeding ink and the printhead rubbing to occur. Refer to the following table for
the relationships between the conditions of the paper other than genuine Canon paper and feed confirmed paper and
the media type to select.

Type

Approximate weight Approximate thickness

Printer control panel

Printer driver

Plain Paper

70 g/m²

0.09 mm (0.0035 in.) Plain Paper

Coated Paper

90 g/m²

0.13 mm (0.0051 in.) LW. Coated Paper

170 g/m²

0.22 mm (0.0087 in.) HW. Coated Paper

Photo Paper

180 g/m²

0.18 mm (0.0071 in.) LW. Photo Paper

LWPhotoPaper(LI)(

Lightweight Photo Paper (LowInk)(

)

260 g/m²

0.26 mm (0.010 in.)

HWPhotoPaper(LI)(

) Heavyweight Photo Paper (LowInk)(

)

Proof

80 g/m²

0.10 mm (0.0039 in.) News Proof

)

Sign/CAD Paper 150 g/m²

0.11 mm (0.0043 in.)

90 g/m²

0.08mm (0.0031 in.)

100 g/m²

0.13 mm (0.0051 in.) Syn.Papr(LowInk)

  *1: Print using slightly less ink. Try this if you are concerned about rubbing of ink after printing.
  *2: Software RIP is required separately.

Selecting Special Settings

Special settings are provided that allow you to select the amount of ink used in steps. You can fix lackluster colors or
bleeding ink by selecting special settings where the amount of ink used is suitable for the paper you are using.

iPF785

                                                                                        

Printing on Paper Other Than Genuine Paper and feed confirmed Paper Using Existing Settings

                                                                                                                                                                                                                             

Handling and Use of Paper

Paper

365