Инструкция для Canon imagePROGRAF iPF785 MFP M40

Pack the printer

Disconnect the power cord and interface cable.

Important

Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and transfer
it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this
procedure again.

 

Tape down printer covers to secure them, in the reverse or-
der of tape removal during installation.

Remove the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure in reverse.

Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping
box.

The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.

Assemble the stand

 

Referring to the Printer Stand Setup Guide, assemble the
Stand.

 

 

iPF785

                                                                                                                                                                                                    

Reinstalling the Printer

                                                                                                                                                                                                                             

Maintenance and Consumables

Other Maintenance

619