Инструкция для Canon imagePROGRAF iPF785 MFP M40
Caution
•
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
poses a risk of injury or bending the Stand.
•
When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters are
not locked poses a risk of injury or damage to the location site.
not locked poses a risk of injury or damage to the location site.
•
Before moving the assembled stand, lift the support
rod to the position shown (a) and unlock all four cas-
ters. Moving the stand with the support rod lowered or
the casters locked may cause injury or damage the
area of installation or basket cloth.
rod to the position shown (a) and unlock all four cas-
ters. Moving the stand with the support rod lowered or
the casters locked may cause injury or damage the
area of installation or basket cloth.
Install the printer
1
Mount the printer on the assembled Stand and tighten the
screws firmly.
screws firmly.
Caution
•
Moving the printer requires at least three people. Be careful to avoid back strain and other injuries.
•
When moving the printer, firmly grasp the Carrying Han-
dles. The printer may be unsteady if you hold it at other
positions, which poses a risk of injury from dropping the
printer.
dles. The printer may be unsteady if you hold it at other
positions, which poses a risk of injury from dropping the
printer.
•
When placing the printer on the Stand, lock all four of the casters of the Stand. Attempting to place the printer
on the Stand while the casters are not locked poses a risk of injury.
on the Stand while the casters are not locked poses a risk of injury.
Reinstalling the Printer
iPF785
Maintenance and Consumables
Other Maintenance
620