Инструкция для Canon imagePROGRAF iPF830
3
Open the Canopy and remove the printed documents
after the printing has finished.
after the printing has finished.
Caution
•
Do not put your hand into the base part of the Canopy or the paper feed path when you open or close
the Canopy. Your hand may get caught, causing injuries or damaging the Stacker.
the Canopy. Your hand may get caught, causing injuries or damaging the Stacker.
Important
•
The Stacker Canopy may become difficult to open depending on how it is stored. If this happens, have
two people hold the handles on the left and right side of the Canopy and open the left and right sides
simultaneously while ensuring that the Canopy does not bend.
two people hold the handles on the left and right side of the Canopy and open the left and right sides
simultaneously while ensuring that the Canopy does not bend.
•
When removing printed documents, remove them all at once so that there is no printed document left in
the Stacker. Once removed, do not return the printed documents back into the Stacker. If there are any
printed documents misaligned from the ejected position, the next ejection may not be performed proper-
ly.
the Stacker. Once removed, do not return the printed documents back into the Stacker. If there are any
printed documents misaligned from the ejected position, the next ejection may not be performed proper-
ly.
•
Remove printed documents after opening the Canopy. If you attempt to remove them while closed, the
printed documents may become scratched.
printed documents may become scratched.
Ejecting to the Output Stacker
Ejecting to the Output Stacker
1
Remove the Stacker from the printer.
2
Go between the Stacker and the printer and open the Out-
put Stacker.
put Stacker.
iPF850 Series
Ejecting to the Output Stacker
Handling Paper
Stacker
35