Инструкция для Canon imagePROGRAF iPF830 MFP M40

You can easily print on paper other than genuine Canon paper and feed confirmed paper without making complica-
ted settings by selecting existing settings provided in the printer control panel and printer driver depending on the
media type you are using. The existing settings consist of general-purpose paper settings provided for each media
type and special settings that allow you to select the amount of ink to use.

Important

The genuine Canon paper settings provided in the printer control panel and printer driver are optimized for genu-
ine Canon paper. If these settings are selected for printing on paper other than genuine Canon paper, the ink may
bleed or the printhead may rub against the paper. In order to easily print on paper other than genuine Canon
paper and feed confirmed paper, we recommend that you select one of the following general-purpose paper set-
tings or special settings.

Note

For an overview of the media types, see "

For details on how to select the media type in the control panel and printer driver, see "

Choosing General-Purpose Paper Settings

Since these settings anticipate a wide variety of paper other than genuine Canon paper and feed confirmed paper,
these settings will make it difficult for bleeding ink and the printhead rubbing to occur. Refer to the following table
for the relationships between the conditions of the paper other than genuine Canon paper and feed confirmed pa-
per and the media type to select.

Type

Approximate weight Approximate thickness

Printer control panel

Printer driver

Plain Paper

70 g/m²

0.09 mm (0.0035 in.) Plain Paper

Coated Paper

90 g/m²

0.13 mm (0.0051 in.) LW. Coated Paper

170 g/m²

0.22 mm (0.0087 in.) HW. Coated Paper

Photo Paper

180 g/m²

0.18 mm (0.0071 in.) LW. Photo Paper

LWPhotoPaper(LI)(

Lightweight Photo Paper (LowInk)(

*1)

260 g/m²

0.26 mm (0.010 in.)

HWPhotoPaper(LI)(

*1) Heavyweight Photo Paper (LowInk)(*1)

Proof

80 g/m²

0.10 mm (0.0039 in.) News Proof

(

*2)

Sign/CAD Paper 150 g/m²

0.11 mm (0.0043 in.)

90 g/m²

0.08mm (0.0031 in.)

100 g/m²

0.13 mm (0.0051 in.) Syn.Papr(LowInk)

  *1: Print using slightly less ink. Try this if you are concerned about rubbing of ink after printing.
  *2: Software RIP is required separately.

Selecting Special Settings

Special settings are provided that allow you to select the amount of ink used in steps. You can fix lackluster colors
or bleeding ink by selecting special settings where the amount of ink used is suitable for the paper you are using.
"Special 1" uses the least amount of ink, with the amount of ink used increasing through 5 steps as the number
increases up to "Special 5" which uses the greatest amount of ink. Although colors become more vivid as the
amount of ink used increases, bleeding also occurs more easily. We recommend that you try in order starting from
"Special 1" while checking the state of the printing.

The Paper Reference Guide are not included. To view, display the Paper Reference Guide on the website from
the links in the installed software. An Internet connection is required in order to view them.

Windows
The basic instructions for displaying the Paper Reference Guide from the printer driver are as follows.

Open the printer driver.
 (See "

iPF830

                                                                                

Printing on Paper Other Than Genuine Paper and feed confirmed Paper Using Existing Settings

                                                                                                                                                                                                                      

Handling and Use of Paper

Paper

323