Инструкция для Canon imagePROGRAF iPF830 MFP M40

 

Lower the Release Lever and close the Top Cover.

If a print job was received
Pressing the OK button will advance the paper, and then printing will begin.

If no print job was received
A menu for selection of the type of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
The printer now starts feeding the paper.

Note

Refer to Paper Reference Guide for details on type of paper to select.  (See "

Print on sheets from a desired starting point as follows.

Set Width Detection to Off

 

On the Tab Selection screen of the Control Panel, press 

◀ or ▶ to

select the Paper tab (

).

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Paper Menu is displayed.

Press ▲ or ▼ to select Paper Details, and then press the OK button.

Press ▲ or ▼ to select the type of paper, and then press the OK button.

Press ▲ or ▼ to select Width Detection, and then press the OK button.

Press ▲ or ▼ to select Off, and then press the OK button.

 

 

iPF830

                                                                                                                                                                      

Printing From a Desired Starting Point

                                                                                                                                                                                                                      

Handling and Use of Paper

Handling sheets

355