Инструкция для Canon imagePROGRAF iPF830 MFP M40
Output Stacker
Output Stacker
Using the Stationary Output Stacker
Using the Stationary Output Stacker
The Stationary Output Stacker can be used in three positions, as shown.
3
1
2
2
3
1
•
When storing printed documents on the Output Stacker
Use position (1).
Use position (1).
•
When the Output Stacker is not used
Move the stacker into position (2).
Move the stacker into position (2).
•
When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods
Lower it to position (3) for storage. (See "
Lower it to position (3) for storage. (See "
When using the Output Stacker again after storage, reattach the Basket Rod on the front of the Output Stacker
to the tips of the left and right basket arms and pull the side rods out completely.
to the tips of the left and right basket arms and pull the side rods out completely.
•
When printing on large, stiff sheets
Use position (3).
Use position (3).
iPF830
Using the Stationary Output Stacker
Handling and Use of Paper
Output Stacker
359