Инструкция для Canon imagePROGRAF iPF830

The Ink Tank Cover is open
Close the Ink Tank Cover.

The Printhead is not installed
Please see "

Ink Tank is not installed
Please see "

"ERROR" is shown on the Display Screen
Turn off the printer and contact your Canon dealer.

The Online lamp and Message lamp are not lit (even once), and nothing appears on the Display
Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.

No paper is loaded
Load paper.  (See "

Turning the printer off

Important

Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer.

 

Make sure no print jobs are in progress.
If the Message Lamp is flashing, check the message on
the Display Screen and take action as necessary.  (See "

If the Data Lamp is flashing, the printer is receiving a print
job. Turn off the printer only after printing is finished.

 

Hold down the Power button for more than a second.

After "Shut Down.. Please Wait.." is shown on the Display
Screen, the printer shuts off.

These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.

 

 

 

Loading and Printing on Rolls

                                                                                                                                                                                  

iPF850

                                                                                                                                                                                                                     

Basic Printing Workflow

Printing procedure

 

18