Инструкция для Canon imagePROGRAF iPF830

Скачать
Страница из 694
Example of paper to load 2
Paper source
Roll Paper Width
Media Type
Upper
36-in. Roll (914.4 mm)
Plain Paper
Lower
A1/A2 Roll (594.0 mm) Canon Coated Paper
 
Important
Double-roll switching cannot function if roll paper of a media type that cannot be automatically cut is fed to
the platen.
For information on support for automatic cutting, refer to Paper Reference Guide. (See "
Note
For details on how to load roll paper in the printer, see "
If roll paper of different widths and different types are loaded in the upper and lower rolls, printing is per-
formed on the roll paper that matches the media types specified in the print job.
Since errors may occur or printing may be performed on the unintended roll depending on the settings, it is
recommended in this case that you print by specifying the better suited roll paper 1 or roll paper 2 without
using double-roll switching.
Printing by Automatically Switching Between Upper and Lower Roll Paper
Printing by Automatically Switching Between Upper and Lower Roll Paper
Prints by automatically switching between roll paper 1 and roll paper 2 depending on the type of media and size
specified in the print job.
For details, refer to the following topics depending on the operating system you are using.
Printing by Automatically Switching Between Upper and Lower Roll Paper (Windows)
Printing by Automatically Switching Between Upper and Lower Roll Paper (Windows)
This section describes how to print by automatically switching between roll paper 1 and roll paper 2 depending on
the print job.
Normally, refer to Basic Printing Method
If you want to print by reducing as much margin of roll paper as possible, refer to Method of Conserving More Pa-
per
. In this case, you need to load roll paper of the same media type in the upper and lower rolls.
Important
If you set Set./Adj. Menu>System Setup>Roll Switching to No RollSwitching in the control panel, printing
may be performed on the unintended roll paper. It is recommended that you set this setting to Use Optimal Size
in advance.
Double-roll switching cannot function if roll paper of a media type that cannot be automatically cut is fed to the
platen.
For information on support for automatic cutting, refer to Paper Reference Guide. (See "
Printing by Automatically Switching Between Upper and Lower Roll Paper
                                                                                                                
iPF850
                                                                                                                                                                                                                     
 
 
Enhanced Printing Options
Using double-roll printing
 
32